# Base de Connaissance - Filtration Industrielle (Hasler Group)

> Extracte complète de la base de données essais et références de filtres à bande sous vide.


## Marchés couverts

- CCH - A2 Cement
- CCH - E4 Technical Silica (and Bulk)
- CCH - F5 Cement and kiln dust dosing
- CCH - H4 Soda Ash
- CCH - other
- MMF - A1 Phosphoric Acid
- MMF - A3 Phosphate Rock
- MMF - B1 Phosphated Fertilizers (MAP,DAP,TSP,DCP …)
- MMF - I3 Lithium
- MMF - L3 Zinc and cadmium
- MMF - N3 Nickel, Cobalt and Manganese
- MMF - Other
- ENV - A5 FGD (Flue-gas & kiln dust/alternative fuels desulfurization)
- ENV - B5 Water Treatment
- ENV - E5 Industrial Waste Water Treatment
- ENV - Other
- DEV - A4 Feed (additives)
- DEV - B4 CERAMIC & MATERIALS (Catalyst,proppants)
- DEV - D4   Sealant - Bonding - Adhesives
- DEV - F4 Battery Pastes
- DEV - G4 Specialty Polymers and resins and compounds
- DEV - I4 Aminated Acids / vitamins / specialty acids (lactic, citric…)
- DEV - J3 Metals recycling
- DEV - Other

## Taxonomie (Marchés / Sous-marchés / Applications / Produits)

| Market | Submarket | Application | Product |
|--------|-----------|-------------|---------|
| CCH | N3 Nickel, Cobalt and Manganese | Hydrometallurgy | Nickel Ore |
| MMF | L3 Zinc and cadmium | FGD | NiSO4 |
| ENV | J3 Metals recycling | POTASH | Carbonate nickel |
| DEV | D3 Uranium | SODA ASH | Ferro nickel concentrate |
|  | F3 Copper | PHOSPHORIC ACID | Goro Nickel |
|  | T3 Other metals | PHOSPHATE ROCK | Zinc residue |
|  | A5 FGD (Flue-gas-desulfurization) | Aluminium slags | Leach residue |
|  | C3 Potash Brine, NaCl, Mg Salts | Tartaric acid | Jarosite |
|  | H4 Soda Ash | Methionine Raw | BZS |
|  | A1 Phosphoric acid | Methionine Pure | Al slags |
|  | A3 Phosphate rock | CaSO4 | Uranium peroxide |
|  | F3 Copper (hydrometallurgy) | Citric acid | Copper oxide |
|  | I4 Aminated Acids / vitamins / specialty acids (lactic, citric…) | Methionine | Dichromate sodium |
|  |  | Hydrasine chlorhydrate | FGD (Gypsum) |
|  |  | Amine acid | Halite |
|  |  | Threonine | Halite waste |
|  |  | Glutamate | Sylvinite |
|  |  | Gallic acid | NaCl Sylvinite |
|  |  | Lactic acid | Sylvinite (KCl + NaCl) |
|  |  | Methionine Extr. | Carnalitte KCl MgCl2 |
|  |  |  | Carnalitte KCl MgCl3 |
|  |  |  | Carnallite |
|  |  |  | KCl |
|  |  |  | Tails |
|  |  |  | Salt |
|  |  |  | NaCl SEPARATION |
|  |  |  | KCl Sylvite |
|  |  |  | NaHCO3 |
|  |  |  | Fluosilicate |
|  |  |  | Chemical product |
|  |  |  | H3PO4 - Sludge |
|  |  |  | H3PO4 - 30% Dihydrate |
|  |  |  | H3PO4 - Defluoration |
|  |  |  | Phosphogypsum |
|  |  |  | Pilot unit |
|  |  |  | H3PO4 |
|  |  |  | H3PO4 + HCL |
|  |  |  | Aluminium Fluoride |
|  |  |  | H3PO4 - 54% Clarificat |
|  |  |  | H3PO4 - 50% hemihydrate |
|  |  |  | H3PO4 - 42% Clarificat |
|  |  |  | Acid sludges |
|  |  |  | Phosphoric acid |
|  |  |  | Phosphate Ore |
|  |  |  | Apatite |
|  |  |  | Tar Sand |
|  |  |  | Gas desulfuris |
|  |  |  | Copper |
|  |  |  | Copper oxychloride |
|  |  |  | Copper powder |
|  |  |  | Copper tailings |

## Produits référencés (table pivot)

- Alginate acids
- Alginate extract - concentrated slurry
- Alginate extract - light slurry
- Alliara 10 - Seaweed + Sulfuric acid
- Alliaria 10 - Hydrated Seaweed
- Alliaria 10 - Seaweed + citric acid
- Aluminium slags
- Betainex (K2SO4)
- Boues CIBA / chargées en soude
- ByPass Dust
- CaCO3
- Enzymatic Hydrolysis of Pretreated Wood
- Gypsum balls
- Gypsum LUGP (Uranium)
- Hydrated seaweed
- Leach residue + Gypsum + precipitates HPG (Uranium)
- Leach Residue + Tailings  HP
- Neutralized Leach Residue HGNLR
- Phosphate
- Plaster /  Sulfate Hemihydrate
- Potash
- Soda Ash
- UNLR - Leach Residue (Uranium)
- Vinasse Safralic (K2SO4)
- Yellow cake YC
- Total général

## Essais de filtration en laboratoire (141 essais)

Chaque essai contient les paramètres suivants :

### Slurry parameters
- Market
- Submarket
- Product
- Csolid (w/w %)
- Tslurry (°C)
- Densityslurry
- Densitysolid
- Viscosity (cP)
- d50 (μm)
- pH
### /!\ Tested /!\ slurry parameters
- Csolid,tested (w/w %)
- Tslurry,tested (°C)
- Densityslury,tested
- Densitysolid,tested
- pHtested
### Clients' target
- Productiontarget (T/h)
- Production priority
- Cake moisturetarget (%)
- Cake moisture priority
- Csolid in filtrate,target (%)
- Csolid in filtrate priority
- Cake analysistarget
- Cake analysis priority
- Filtrate analysistarget
- Filtrate analysistarget priority
- Global wash ratiotarget (m3/Tdry solid)
- Global wash ratio priority
### Filtration test parameters
- Cloth - permeability (L/dm2/min) - weaving
- Thicknesscake (mm)
- Pick-up time (s)
- Washing agent and method
- Twashing (°C)
- Global wash ratio (m3/Tdry solid)
- Washing agent pH
- Washing agent conductivity (µS/cm)
- Interzone (s)
- tdrying (s)
- Steam hood (Tested/Kept)
- Press (Tested/Kept)
- Flocculancts(F)/Surfactants(S) (Tested/Kept)
- Cycle time (s)
- Filtrability (kg/h/m2)
### Performances reached
- Production (T/h)
- Cake moisture (%)
- Cake moisture with artifice (%)
- Csolid in filtrate (%)
- Impurity
- Cake analysis
- Filtrate analysis
### Report/Selling data
- TG
- Customer
- Report date
- Kind of filter
- Sold (Yes/No)
- Start-up date
- Filter reference number
- Project number
- Hasler Group Standard / Area
- Comments

### Données des 141 essais

| Market | Submarket | Product | Csolid (w/w %) | Tslurry (°C) | Filtrability (kg/h/m2) | Cake moisture (%) | Customer | Kind of filter | Sold (Yes/No) | Report date |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
|  |  | Dichromate sodium | / | / | / | / | Viscnu chemicals | FAB | YES | 08/2009 |
| MMF |  | Coal  | / | / | 576 | 39.1 | IPAS | FAB | / | 06/2001 |
| MMF | G3 Industrial minerals | Jarosite | / | / | 570 | / | OUTOKUMPU ZINC OY | FAB | / | 12/2001 |
| MMF | L3 Zinc and cadmium | Sulphur | / | / | 115 | 49.5 | OUTOKUMPU ZINC OY | FAB | / | 12/2001 |
| MMF | G3 Industrial minerals | Nyobium | / | / | 335 | / | La Mine Niobec | FAB | / | 11/1999 |
| MMF | U3 Pyrometallurgy - calcinators - minerals kiln feed | Calcine | / | / | 113 | 35 | N Komati AVMIN | FAB | / | 07/2001 |
| MMF | F3 Copper | Copper concentrate K.D.P.M | / | / | 700 | 16 | Konkola Copper Mines plc | FR | YES | 09/2001 |
| MMF | F3 Copper | Leach slurry | / | / | 1500 | 19 | KOLWEZI Pilot Plant | FAB | / | 09/2001 |
| MMF | F3 Copper | Copper slurry |Pre - Leach Slurry | / | / | 300 | 20 | MINTEK - KOLWEZI | FAB | / | 02/2005 |
| MMF | F3 Copper | Copper slurry |Post - Leach Slurry | 68 | / | 1950 | / | MINTEK - KOLWEZI | FAB | / | 02/2005 |
| MMF | L3 Zinc and cadmium | Zinc | / | / | 1300 | 20 | Gamsberg | FAB | / | 06/2001 |
| MMF | N3 Nickel, Cobalt and Manganese | Nickel suspension | / | / | 2200 | 4 | IMPALA | FAB | / | 10/2000 |
| MMF | N3 Nickel, Cobalt and Manganese | Cobalt suspension | / | / | 3000 | 7 | IMPALA | FAB | / | 10/2001 |
| MMF | G3 Industrial minerals | Jarosite | / | / | 200 | 40 | Cajamarquilla | FAB | / | 11/2000 |
| MMF | T3 Other metals | Pb/Ag residu | / | / | 50 | 60 | Cajamarquilla | FAB | / | 11/2000 |
| CCH | G4 Specialty polymers and resins | Furfural resin | / | / |  |  | TFC Furfural | FAB & FR |  | 07/2001 |
| CCH | G4 Specialty polymers and resins | Furfural resin | / | / | / | / | TFC Furfural | FAB / FR | / | 06/2001 |
|  |  | Dye | Rouge 4B | / | / | 260 | 71 | Steiner | FR | / | 06/2001 |
|  |  | Dye | Base de brun | / | / | 85 | 65 | Steiner | FR | / | 06/2001 |
|  |  | Dye | Base de chryoidine | / | / | 28 | 76 | Steiner | FR | / | 06/2001 |
|  |  | EAF Dust | Slurry B | / | / | 205 | 23 | Paul Wurth | FAB | / | 09/2001 |
|  |  | EAF Dust |Slurry C | / | / | 205 | 26 | Paul Wurth | FAB | / | 09/2001 |
| MMF | D3 Uranium | Uranium leach residue | Blend 82/18 (%) | / | / | 3200 | 14 | Rössing | FAB | / | 05/2002 |
| MMF | D3 Uranium | Uranium leach residue | Blend 80/20 (%) | / | / | 3000 | 16 | Rössing | FAB | / | 05/2002 |
| MMF | D3 Uranium | Uranium leach residue | Blend 77/23 (%) | / | / | 2200 | 15 | Rössing | FAB | / | 05/2002 |
| MMF | D3 Uranium | Uranium leach residue | / | / | 1500 | 13 | Rössing | FAB | / | 05/2002 |
| MMF | A1 Phosphoric acid | H3PO4 | / | / |  | <26 | ROTEM | FAB | Yes | 11/2009 |
| CCH | H4 Soda Ash | Soda Ash | / | / | / | 16.5 | Ciech Matwy | FAB | Yes | 04/2013 |
| CCH | H4 Soda Ash | Soda Ash | / | / | / | 16 | Ciech Janikowo | FAB | Yes | 04/2013 |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1050 | 16 | LONGSHAN | FAB | Yes | 03/2014 |
|  |  |  |  |  | 300 | < 30 | LIFOSA | FAB | Yes | 10/2015 |
| MMF | J3 Metals recycling | Aluminium slags | 15 | 20 | 175 | / | RESAL | FAB | Yes | 12/2015 |
| MMF | J3 Metals recycling | Aluminium slags | 45 | 29 | / | / | RESAL - Spain | FAB | Yes | 04/2018 |
| MMF | A1 Phosphoric acid | H3PO4 |  |  | 5170 | 15 | LEBANON CHEMICALS | FAB | Yes | 10/2017 |
|  |  | / |  |  |  |  | SIMPLOT Pocatello - Don Plant | ATF |  | 06/2022 |
| CCH | P4 Other chemicals | Product Y | / | / | 1000 | 30 | MICHELIN KARLSRUHE | FR | / | 04/2019 |
| MMF | N3 Nickel, Cobalt and Manganese | Gypsum | 19 | 67.5 | 648 | 45.7 | VALE NOUVELLE CALEDONIE | FAB | / | 06/2019 |
| MMF | N3 Nickel, Cobalt and Manganese | Gypsum | 19 | 67.5 | 608 | 45.7 | VALE NOUVELLE CALEDONIE | FAB | / | 06/2019 |
| MMF | K3 Waste/dust tailing valorization | PX301 - Gypsum | / | / | 568 | <35 | American Zinc Products LLC - Mooresboro Plant | FAB | / | 04/2019 |
| MMF | K3 Waste/dust tailing valorization | PX301 - Gypsum | / | / | 606 | 30 | American Zinc Products LLC - Mooresboro Plant | FAB | / | 04/2019 |
| MMF | K3 Waste/dust tailing valorization | PX301 - Gypsum | / | / | 318 | 30 | American Zinc Products LLC - Mooresboro Plant | FAB | / | 04/2019 |
| CCH | P4 Other chemicals | Styrene | / | / | / | / | Mixt Composites Recyclables | Not adapted to filtration | / | 06/2019 |
| MMF | D3 Uranium | Yellow cake diluted (Uranium) | / | / | Tests dropped | Tests dropped | Nex Gen - Wood | Not adapted to FAB | / | 07/2019 |
| MMF | D3 Uranium | Gypsum LUGP (Uranium) | / | / | 670 | 30 | Nex Gen - Wood | FAB | / | 07/2019 |
| MMF | D3 Uranium | Leach residue + Gypsum + Precipitates HPG (Uranium) | / | / | 230 | 39 | Nex Gen - Wood | FAB | / | 07/2019 |
| MMF | D3 Uranium | Leach Residue + Tailings  HP (Uranium) | / | / | 400 | 44.5 | Nex Gen - Wood | FAB | / | 07/2019 |
| MMF | D3 Uranium | Neutralized Leach Residue HGNLR (Uranium) | / | / | 830 | 30 | Nex Gen - Wood | FAB | / | 07/2019 |
| MMF | D3 Uranium | UNLR - Leach Residue (Uranium) | / | / | 120 | 35 | Nex Gen - Wood | FAB | / | 07/2019 |
| CCH | J4 Pharmaceuticals / Perfume intermediate / Cosmetics | Adjuvant | / | / | / | / | SPI PHARMA | FR | / | 04/2019 |
| MMF | J3 Metals recycling | Aluminium slags | 65 | 60 | / | 32.5 | BEFESA - Valladolid | FAB | Yes | 07/2019 |
| CCH | H4 Soda Ash | Soda Ash | / | / | 700 | 23.4 | SODA SISECAM LUKAVAC | FAB | / | 11/2019 |
| CCH | K4 Sugars, starches, proteins, bioproducts, alcohol, edible oil and derivates | Wood Biomass | / | / | 43 | 66 | Arbiom | FAB | / | 10/2019 |
| MMF | H3 Aluminium and bayer alumina  | Alumine | / | / | 93 | 71 | AXENS | FAB | / | 10/2019 |
| MMF | H3 Aluminium and bayer alumina  | Alumine | / | / | 29 | 84 | AXENS | FAB | / | 10/2019 |
| CCH | I4 Specialty acids / vitamins / specialty acids | Lactic acid + Gypsum | / | / | 438 | <30 | Glanbia | FAB | / | 10/2019 |
| CCH | G4 Specialty polymers and resins | Acrylic Polymer | / | / | 260 | 55 | AKSA AKRILIK KIMYA SAN | FR | / | 10/2019 |
| MMF | J3 Metals recycling | Aluminium slags | / | / | 210 | 42 | Raffmetal | FAB | / | 02/2020 |
| MMF | L3 Zinc and cadmium | Sulphur Flotation concentrate | / | / | 1395 | 17 | Teck | FAB | / | 02/2020 |
| CCH | E4 Technical silica | Gel | 7.5 | / | 150 | 89 | Solvay | FAB | / | 02/2020 |
| MMF | J3 Metals recycling | Aluminium slags | / | / | 241 | 35 | REFIAL | FAB | / | 08/2020 |
| MMF | J3 Metals recycling | Aluminium slags | 35 | 55 | 174 | 39 | INTALS | FAB | / | 02/2020 |
| MMF | J3 Metals recycling | Aluminium slags | 35 | 55 | 174 | 39 | INTALS | FAB | Yes | 02/2020 |
| MMF | J3 Metals recycling | Aluminium slags | 35 | 55 | 174 | 39 | INTALS | FAB | Yes | 02/2020 |
| CCH | G4 Specialty polymers and resins | PVDF (Grade Solef 5130) | / | / | 434 | 26.8 | Solvay | FAB | / | 07/2020 |
| CCH | G4 Specialty polymers and resins | PVDF (Grade Solef 75130) | / | / | 636 | 19.5 | Solvay | FAB | / | 07/2020 |
| CCH | I4 Specialty acids / vitamins / specialty acids | Salicylic acid | / | / | 1150 | 17 | SEQENS | FAB | / | 09/2020 |
| CCH | G4 Specialty polymers and resins | PVDF (Grade Solef 21510) | / | / | 410 | 23.9 | Solvay | FAB | / | 10/2020 |
| MMF | H3 Aluminium and bayer alumina  | Alumina | / | / | / | 5 | ALTEO | ATF | / | 09/2020 |
| MMF | H3 Aluminium and bayer alumina  | Alumina | / | / | 1400 | 5 | ALTEO | ATF | / | 09/2021 |
| MMF | H3 Aluminium and bayer alumina  | Alumina | / | / | 1150 | 5 | ALTEO | ATF | / | 09/2022 |
| MMF | H3 Aluminium and bayer alumina  | Alumina | / | / | 1000 | 5 | ALTEO | ATF | / | 09/2023 |
| CCH | I4 Specialty acids / vitamins / specialty acids | Crude terephtalic acid | / | / | 81 | 68.5 | CARBIOS | FAB | / | 10/2020 |
| CCH | I4 Specialty acids / vitamins / specialty acids | Pure terephtalic acid | / | / | 550 | <25 | CARBIOS | FAB | / | 10/2020 |
| MMF | E3 Rare Earth | Rares Earths | / | / | 700 | <30 | DEWATERING SOLUTIONS | / | / | 09/2020 |
| CCH | P4 Other chemicals | Alginate acids | / | / | / | / | BBEPP | Not adapted to filtration | / | 04/2021 |
| CCH | P4 Other chemicals | Alginate extract - concentrated slurry | 2 | / | 6 | 94 | BBEPP | FAB | / | 04/2021 |
| CCH | P4 Other chemicals | Alginate extract - light slurry | 2 | / | 6 | 94 | BBEPP | FAB | / | 04/2021 |
| CCH | P4 Other chemicals | Alliara 10 - Seaweed + sulfuric acid | 4 | / | 60 | 90 | BBEPP | FAB | / | 04/2021 |
| CCH | P4 Other chemicals | Alliaria 10 - Hydrated Seaweed | 4 | / | 52.5 | 92 | BBEPP | FAB | / | 04/2021 |
| CCH | P4 Other chemicals | Alliaria 10 - Seaweed + citric acid | / | / | 100 | 90 | BBEPP | FAB | / | 04/2021 |
| CCH | K4 Sugars, starches, proteins, bioproducts, alcohol, edible oil and derivates | Enzymatic Hydrolysis of Pretreated Wood | 15 | 47.5 | / | / | Arbiom / BBEPP | FAB | / | 05/2021 |
| CCH | P4 Other chemicals | Alginate acids | / | / | / | 99.1 | BBEPP | Not adapted to FAB | / | 07/2021 |
| CCH | P4 Other chemicals | Alginate extract | / | / | 48 | 93.3 | BBEPP | FAB | / | 07/2021 |
| CCH | P4 Other chemicals | Hydrated seaweed | / | / | 140 | 89 | BBEPP | FAB | / | 07/2021 |
| CCH | P4 Other chemicals | Seaweed + citric acid | / | / | 70 | 91.5 | BBEPP | FAB | / | 07/2021 |
| CCH | P4 Other chemicals | Seaweed + sulfuric acid | / | / | 18 | 91.2 | BBEPP | FAB | / | 07/2021 |
| ? | ? | Gypsum balls - fresh CRG tamisée (p>53μm) | / | / | / | 13 | SOLVAY | FAB | / | 12/2021 |
| CCH | A2 Cement | ByPass Dust | / | / | 296 | 40 | KREISEL | FAB | / | 11/2021 |
| CCH | A2 Cement | ByPass Dust | / | / | 300 | 40 | KREISEL | FAB | / | 11/2021 |
| MMF | C1 Potassium fertilizers | Pota Ash | / | / | 110 | 9 | NUTRIEN | FR | / | 04/2022 |
| MMF | V3 Building materials, Plaster | Plaster /  Sulfate Hemihydrate | / | / | 1000 | 15 | Saint-Gobain | FAB | / | 02/2022 |
| MMF | MMF - B1 Phosphated fertilizers | Phosphate | / | / | 2500? | / | Miski Mayo - Peru | FAB | / | 02/2022 |
| CCH | O4 Enzymes and yeasts | Betainex (K2SO4)  | / | / | 500 | 7 | Biospringer | FR? | / | 12/2022 |
| CCH | O4 Enzymes and yeasts | Vinasse Safralic (K2SO4) | / | / | 83.33333333333333 | 7 | Biospringer | FR? | / | 12/2022 |
| CCH | P4 Other chemicals | CIBA slugs/ loaded with soda | / | / | 400 | 26 | KEMONE | FAB | / | 05/2022 |
| MMF | J3 Metals recycling | Aluminium slags | / | / | 320 | 41 | R.V.A | FAB | / | 05/2022 |
| Environment | A5 FGD | CaCO3 | / | / | / | 40 | SKE&S | FAB | / | 07/2022 |
| MMF | J3 Metals recycling | Aluminium slags | / | / | / | 27 | ALTEK | FAB | / | 12/2022 |
| MMF | A1 Phosphoric acid | Phosphoric acid |  |  |  |  | SIMPLOT - Rock Springs Plant | ATF | / | 06/2022 |
| Environment | A5 FGD | CaCO3 | / | / | 663 | 16.7 | SKE&S | FAB | / | 11/2022 |
| Environment | A5 FGD | CaCO3 | / | / | 995.52 | 9 | SKE&S | FAB | / | 11/2022 |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1050 | 22,75 (t drying = 32s) | GHCL - India | FAB | / | 09/2022 |
| MMF | J3 Metals recycling | Aluminium slags | / | / | 270 | 22 | BEFESA | / | / | / |
| MMF | J3 Metals recycling | Aluminium slags | / | / | 160 | 15.9 | VEDANI | / | / | / |
| MMF | G3 Industrial minerals | BZS | / | / | 250 | 16.7 | HZL | / | / | / |
| MMF | N3 Nickel, Cobalt and Manganese | Carbonate nickel | / | / | 40 | 55 | ERAMET | / | / | / |
| MMF | F3 Copper | Copper oxide | / | / | 170 | / | ERACHEM | / | / | / |
| MMF | N3 Nickel, Cobalt and Manganese | Ferro nickel concentrate | / | / | 680 | 58.8 | CERRO MATOSO | / | / | / |
| MMF | N3 Nickel, Cobalt and Manganese | Goro nickel | / | / | 490 | 36 | VALE INCO | / | / | / |
| MMF | G3 Industrial minerals | Jarosite | / | / | 110 | 45 | HZL | / | / | / |
| MMF | G3 Industrial minerals | Jarosite | / | / | 150 | 37.5 | BINANI | / | / | / |
| MMF | G3 Industrial minerals | Jarosite | / | / | 130 | 37.5 | HZL | / | / | / |
| MMF | G3 Industrial minerals | Jarosite | / | / | 100 | 55 | BOLIDEN | / | / | / |
| MMF | G3 Industrial minerals | Jarosite | / | / | 100 | 43.5 | PORTOVESME | / | / | / |
| MMF | G3 Industrial minerals | Leach residue | / | / | 250 | / | NAMZINC | / | / | / |
| MMF | N3 Nickel, Cobalt and Manganese | Nickel ore | / | / | 1460 | 22 | ERAMET | / | / | / |
| MMF | G3 Industrial minerals | Sodium dichromate | / | / | 510 | 26 | VISHNU CHEMICALS | / | / | / |
| MMF | D3 Uranium | Uranium peroxide | / | / | 70 | / | COGEMA/AREVA | / | / | / |
| MMF | L3 Zinc and cadmium | Zinc residue | / | / | 90 | 35.7 | ESPANOLA DEL ZINC | / | / | / |
| MMF | J3 Metals recycling | Aluminium slags | 36 | 70 | 135 | 43 | Alumetal | FAB | / | 03/2023 |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1200 | 16 | Sterlitamak | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1100 | 16 | Sterlitamak | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1200 | 16 | Sodawerk | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 900 | 16.8 | Torrelavega | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1100 | 16 | Rosignano | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1100 | 16.5 | Ciech Matwy | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1100 | 16 | Ciech Janikowo | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1100 | 16 | Nanfang | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 1100 | 16 | Jingshen | FAB | Yes | / |
| CCH | H4 Soda Ash | Soda Ash | / | / | 900 | 16 | Kunshan | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 860 | 10 | KOREA EAST-WEST POWER CO LTD (EWP) | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 900 | 10 | KOREAN WESTERN POWER CO LTD (KOWEPO) | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 880 | 10 | KOREAN SOUTH-EAST POWER (KOSEP) | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 890 | 10 | KOREAN WESTERN POWER CO LTD (KOWEPO) | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 890 | 10 | KOREA MIDLAND POWER CO (KOMIPO) | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 910 | 10 | BABCOCK & WILCOX | FAB | Yes | / |
| ENV | A5 FGD (Flue-gas-desulfurization) | FGD (Gypsum) | / | / | 970 | 10 | GEORGIA POWER, PLANT AMEC BOWDEN | FAB | Yes | / |
| MMF | G3 Industrial minerals | Jarosite | 30 | 85 | 100 | 42.5 | BOLIDEN KOKKOLA OY |  | / |  |
| MMF | C3 Potash Brine, NaCl, Mg Salts | NaCl Sylvinite | / | / | 13300 | 20 | DEAD SEA WORKS | FAB | Yes | / |
| MMF | C3 Potash Brine, NaCl, Mg Salts | Carnalitte KCl MgCl2 | / | / | 7200 | 20 | DEAD SEA WORKS | FAB | Yes | / |
| MMF | L3 Zinc and cadmium | Zinc residue |  |  |  |  | DEAD SEA WORKS | FAB | Yes | / |

## Filtres de référence installés (92 filtres)

Données opérationnelles des filtres à bande sous vide installés chez les clients.

| TG | Product | Market | Country | Location | Site of production | Start-up date | Area (m2) | Filtrability (T/h/m2) | Cake moisture (%) | Frame | Rubber belt |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| TG | Product | Market | Country | Location | Site of production | Start-up date | Area (m2) | Filtrability (T/h/m2) | Cake moisture (%) | Frame | Rubber belt |
| 3768? | Nickel ore | MMF | NCL | Tiébaghi | LE NICKEL-SLN  | 2006 | 15.75 | 1.46 | 22 | Carbon steel | SBR |
| 3975 | Carbonate nickel | MMF |  |  | ERAMET |  | 8.13 | 0.04 | 55 | AISI 316L | SBR |
| SD0130 | NiSO4 | MMF |  |  | BOLIDEN | 2026 | 6 |  | 19 |  |  |
| 3834 | Nickel | MMF | COL | Montelibano | CERRO MATOSO |  | 2.5 | 0.68 | 58.8 | Carbon steel | SBR |
| 3560? - 4307 | Nickel (neutralized slurry) | MMF | NCL | Mont Dore | VALE INCO | 2009 | 120 | 0.49 | 36 | AISI 316L | SBR |
| 3430 (démarrage) | Zinc residue | MMF |  |  | ESPANOLA DEL ZINC |  | 31.5 |  |  | AISI 316L | SBR |
| 3743 - 4047? | Zinc (Jarosite) | MMF | IND | Kerala | BINANI ZINC LIMITED | 2005 | 63 | 0.15 | 37.5 | AISI 316L | SBR |
| 3873 - 3933 (Technical visit)- 4096 | Zinc (BZS) | MMF | IND | Chanderiya | HINDUSTAN ZINC | 2007 | 24 | 0.25 | 16.7 | AISI 304L | SBR |
| 3873 - 3933 (Technical visit) - 4141 (Lab test offer) - 4175 (lab test offer) | Zinc (Jarosite) | MMF | IND | Chanderiya | HINDUSTAN ZINC | 2007 | 84 | 0.11 | 45 | AISI 304L | SBR |
| 3872 (Démarrage) - 3500 | Aluminium slags | MMF |  |  | VEDANI |  | 40 | 0.16 | 15.9 | AISI 316L | SBR |
| 3844 - 4326 (Pannevis belt filter process audit) | Aluminium slags | MMF | ESP | Valladolid | BEFESA ALUMINIO SA | 2007 | 45 | 0.27 | 22 | Carbon steel | EPDM |
| 3859 (Démarrage) - 3976 - 4059 (commissioning offer) | Uranium peroxide | MMF |  |  | COGEMA/AREVA |  | 6 | 0.07 |  | AISI 316L | SBR |
| 3741 | Copper oxide | MMF | BEL | St Ghislain | ERACHEM COMILOG | 2005 | 3 | 0.17 |  | AISI 904L | SBR |
| 3905 (Démarrage) - 3933 (Technical visit) - 4066 (Audit) | Dichromate sodium | MMF | IND | Anakapalle | VISHNU CHEMICALS | 2007 | 49.5 | 0.51 | 26 | Carbon steel | EPDM |
| 4121 | FGD (Gypsum) | ENV |  |  | KC Cotrell |  | 12.4 | 0.81 | 10 | Carbon steel | SBR |
| 4109 (Start up) | FGD (Gypsum) | ENV | KOR | Yeong_Heung 5,6 | KOREAN SOUTH-EAST POWER (KOSEP) | 2014 | 49.5 | 0.81 | 10 | Carbon steel | SBR |
| 3955 (mechanical acceptance) | FGD (Gypsum) | ENV | USA | Stratton | FIRST ENERGY SAMMIS | 2010 | 73.5 | 0.87 | 13 | Carbon steel | SBR |
| 3937 (Visit + Lab test) - 4020 (Technical audit) | FGD (Gypsum) | ENV | USA | Casterville | GEORGIA POWER, PLANT AMEC BOWDEN | 2007 | 93 |  |  | Carbon steel | SBR |
| 3956 (mechanical acceptance) - 3961 (Visit) | FGD (Gypsum) | ENV |  |  | Korea zinc eng |  | 13.7 | 0.66 |  | Carbon steel | SBR |
| 3896 (démarrage) | FGD (Gypsum) | ENV | LTU | Elektrenaï | BABCOCK & WILCOX | 2008 | 49.5 | 0.45 | 11.3 | Carbon steel | SBR |
| 3849 (démarrage) | FGD (Gypsum) | ENV | KOR | Panwol | STX ENGINE CO LTD | 2006 | 8 |  | 14 | Carbon steel | SBR |
| (3893 démarrage) | FGD (Gypsum) | ENV | KOR | Ha Dong Thermal Power | KOREAN SOUTHERN POWER (KOSPO) | 2007 | 40.5 | 0.86 | 10 | Carbon steel | SBR |
| 3729? (acceptance report) | FGD (Gypsum) | ENV | KOR | Samchonpo | KOREAN SOUTH-EAST POWER (KOSEP) | 2003 | 51 | 0.58 |  | Carbon steel | SBR |
| 3818 - 3938 (supervision report) | FGD (Gypsum) | ENV | KOR | TaeAn | KOREAN WESTERN POWER CO LTD (KOWEPO) | 2005 | 40.5 |  |  | Carbon steel | SBR |
| 3883 (démarrage) | FGD (Gypsum) | ENV | KOR | Boryeong | KOREA MIDLAND POWER CO (KOMIPO) | 2006 | 40.5 | 0.99 | 9.97 | Carbon steel | SBR |
| 3635 (démarrage)? | Sylvinite | MMF |  |  | DEAD SEA WORKS |  | 51 | 5.5 | 20 | AISI 316L | EPDM |
| 3635 (démarrage)? | NaCl Sylvinite | MMF |  |  | DEAD SEA WORKS |  | 15 | 10 | 16 | AISI 316L | SBR/EPDM |
| 3763 | Sylvinite | MMF |  |  | QINGHAI |  | 55.5 | 0.97 | 15 | Carbon steel | SBR |
| 3635 (démarrage)? | Carnalitte KCl MgCl3 | MMF |  |  | DEAD SEA WORKS |  | 50 | 4.6 | 20 | AISI 316L | SBR/EPDM |
| 3947 (acceptance tests) | NaHCO3 | CCH | RUS | Sterlitamak | JSC BASHKIRSKAIA SODOVAIA | 2009 | 40 | 1.2 | 16.8 | AISI 316L | SBR |
| 3946 (acceptance tests) | NaHCO3 | CCH | RUS | Sterlitamak | JSC BASHKIRSKAIA SODOVAIA | 2009 | 66 | 1.2 | 16.4 | AISI 316L | SBR |
| 2526 - 4086 - 4211 (cake washing optimization) | NaHCO3 | CCH | POL | Inovroclaw | SODA POLSKA CIECH ( Ciech Matwy) | 2014 | 73.5 |  | 16.5 | AISI 316L | SBR |
| 3536 - 4086 | NaHCO3 | CCH | POL | Janikowo | SODA POLSKA CIECH (Ciech Janikowo) | 2014 | 54 |  | 16 | AISI 316L | SBR |
| 3953 - 4075 ? (démarrage) | NaHCO3 | CCH | CHN | GUANGZHOU | GUANDONG NANFANG SODA ASH INDUSTRIAL CO/ LTD | 2013 | 108 | 0.9851851851851853 | 18.7 | AISI 316L | SBR |
| 4014 - 4077 | NaHCO3 | CCH | CHN | Huan an City | Jingshen | 2010 | 54 | 1.2 | 20.97 | AISI 316L | SBR |
| 4161 | NaHCO3 | CCH | CHN | Kunshan | Kunshan | 2014 | 81 |  |  | AISI 316L | SBR |
| 3936 (Technical visit) | H3PO4 - 30% Dihydrate | MMF | IND | Madras | COROMANDEL INTERNATIONAL FERTILIZER | 1995 | 25 |  |  |  |  |
| 4251 (audit process offer) - 4278 (audit process offer) - 4322 (process audit offer) | Phosphogypsum | MMF | ISR | Arad | ROTEM AMFERT NEGEV | 1995 | 100 |  |  |  |  |
| 3954 - 4151 (audit) | H3PO4 | MMF | ISR | Arad | ROTEM AMFERT NEGEV | 1991 | 40 |  |  |  |  |
| 3954 | H3PO4 - 30% Dihydrate | MMF | ISR | Arad | ROTEM AMFERT NEGEV | 1991 | 12.5 |  |  |  |  |
| 3306 (démarrage) | H3PO4 - Sludge | MMF | LBN | Selaata | LEBANON CHEMICALS | 2001 | 30 |  |  |  |  |
| 4219 | H3PO4 - 54% Clarificat | MMF | LBN | Selaata | LEBANON CHEMICALS | 2003 | 24 | 5.17 | <0,15 |  |  |
| 3645 | Pilot Unit | MMF | USA |  | BATEMAN / CARGILL / USA | 2003 | 0.5 |  |  |  |  |
| 4244 (process audit offer) | H3PO4 - 30% Dihydrate | MMF | USA | Plant City - Florida | MOSAIC FERTILIZERS INC. | 1997 | 100 |  |  |  |  |
| 4244 (process audit offer) | H3PO4 - 30% Dihydrate | MMF | USA | Plant City - Florida | MOSAIC FERTILIZERS INC. | 1997 | 84 |  |  |  |  |
| 4155 - 4188 (start up) - 4390 (lab test offer) | Phosphoric acid | MMF | LIT | Kedainiai | LIFOSA | 2016 | 20 |  |  |  |  |
| 3625 - 4000 | Phosphate Ore | MMF | DZA | Djebel onk | SOMIPHOS | 2010 | 36 |  |  | S 235 JR |  |
| TG 3494 (démarrage) - 3545? | Apatite | MMF | CAN | Kapuskasing | AGRIUM PARTNERSHIP | 2001 | 100 |  |  |  |  |
| 3991 - 4045 | Apatite | MMF | FIN | Siilinjärvi | YARA | 2012 | 57 |  |  |  |  |
| 4044 (commissioning) - | Phosphate Ore | MMF | MAR | Safi | OCP (MP2) | 2011 | 25 |  |  |  |  |
| 3982 - 3363 ? - 4057? - 4091? - 4123? - 4268 (audit meca + process) - 4441 (audit report) | Phosphate Ore | MMF | PER | Piura | CMM Miski Mayo / Bayovar | 2010 | 120 |  |  |  |  |
| 3699 | FGD (Gypsum) | ENV | DEU | Godorf | SHELL DEUTSCHLAND OIL GmbH | 2001 | 6 |  |  |  |  |
| 4149 - 4162 (start up) - 4202 | FGD (Gypsum) | ENV | KOR | Taean | IGCC-TAEAN | 2014 | 9.1 |  |  |  |  |
| 3838 (essais problèmes) | Copper powder | MMF | FRA | Senecourt | POUDMET | 1984 | 1 |  |  |  |  |
| 4089 (installation report) - 4166 | Copper tailings | MMF | ESP | Cobre las cruces | COBRE LAS CRUCES SA | 2016 | 0.5 |  |  |  |  |
| 4077 - 4124 (Start up) | NaHCO3 | CCH | CHN | Zhumadian | HENAN JUNHA | 2014 | 81 |  |  |  |  |
| 3616 | NaHCO3 | CCH | FRA | Dombasle s/Meurthe | SOLVAY | 1987 | 1.5 |  |  |  |  |
| 4112 - 4135 (start up) | NaHCO3 | CCH | CHN | Hangahou, Zhejiang Province | HANGZHOU LONGSHAN CHEMICAL CO | 2015 | 81 |  | 15 |  |  |
| 4190 (start up) | NaHCO3 | CCH | CHN | Huachang | HUACHANG | 2016 | 81 |  |  | AISI 316L | SBR |
| 4364 (audit report) - 4396 (cloth testing) | Aluminium slags | MMF | ITA | Parona | INTALS | 2001 | 50 | 0.174 | 39 |  |  |
| 4364 (audit report) - 4396 (cloth testing) | Aluminium slags | MMF | ITA | Parona | INTALS | 2007 | 40 | 0.174 | 39 |  |  |
| 4156 - 4178 (process audit) - 4363 | Aluminium slags | MMF | ESP |  | RESAL | 2016 | 25 |  |  |  |  |
| 3607? - 4097 (lab test offer) - 4170 | CaSO4 | CCH | BEL | Escanafles | GALACTIC | 1993 | 5 |  |  |  |  |
| 3684? | Citric acid | CCH | BEL | Tienen | CITRIQUE BELGE | 1992 | 12.5 |  |  |  |  |
| 3562? | Amine acid | CCH | FRA | Amiens | AJINOMOTO EUROLYSINE |  | 6 |  |  |  |  |
| 4184 - 4246 (process audit offer) | Gallic acid | CCH | FRA | Trosly Breuil | WeylChem |  | 5 |  |  |  |  |
| 4300 (process audit) | Methionine Pure | CCH | USA | Theodore | EVONIK INDUSTRIES | 1997 | 30 |  |  |  |  |
| 4300 (process audit) | Methionine Raw | CCH | USA | Theodore | EVONIK INDUSTRIES | 1997 | 25 |  |  |  |  |
| 4300 (process audit) | Methionine Extr. | CCH | USA | Theodore | EVONIK INDUSTRIES | 2010 | 5 |  |  |  |  |
| TG 3353 | Zinc (Gypsum) | MMF | CAN | Flin Flon | HUDSON BAY MINING & SMELTING CO | 2000 | 70 |  |  |  |  |
| TG 3353 | Zinc (Jarosite) | MMF | CAN | Flin Flon | HUDSON BAY MINING & SMELTING CO | 1998 | 70 |  |  |  |  |
| 3878 (start-up) | Zinc (Jarosite) | MMF | FIN | Kokkola | BOLIDEN | 2008 | 51 | 0,1 (data from 1996, 2008 or 2014) | 55 (data from 1996, 2008 or 2014) | AISI 316L (data from 1996, 2008 or 2014) | SBR (data from 1996, 2008 or 2014) |
| 4116 | Magnesium removal | MMF | FIN | Kokkola | BOLIDEN | 2014 | 51 | 0,1 (data from 1996, 2008 or 2014) | 55 (data from 1996, 2008 or 2014) | AISI 316L (data from 1996, 2008 or 2014) | SBR (data from 1996, 2008 or 2014) |
| 4177 - 4179 | Jarosite | MMF | FRA | Auby | NYRSTAR | 1990 | 1 |  |  |  |  |
| 3511 | Zinc oxide | MMF | MAR | Guemassa | CIE MINIERE DE GUEMASSA | 2001 | 30 |  |  |  |  |
| 3511 | Zinc oxide | MMF | MAR | Guemassa | CIE MINIERE DE GUEMASSA | 2001 | 69 |  |  |  |  |
| 4150 (audit offer) | Leach Residue | MMF | NAM | Rosh Pinah | NAMZINC | 2005 | 147 | 0,29 (value from 2005 or 2002) |  | AISI 316L (data from 2005 or 2002) | SBR (data from 2005 or 2002) |
| 4150 (audit offer) | Leach Residue | MMF | NAM | Rosh Pinah | NAMZINC | 2002 | 147 | 0,29 (value from 2005 or 2002) |  | AISI 316L (data from 2005 or 2002) | SBR (data from 2005 or 2002) |
| 4150 (audit offer) | Demonstration | MMF | NAM | Rosh Pinah | NAMZINC | 2002 | 0.5 |  |  |  |  |
| 4150 (audit offer) | Zinc (BZS) | MMF | NAM | Rosh Pinah | NAMZINC | 2002 | 36 |  |  |  |  |
| 3497 - 3845 - 3842 - 4002 (process audit) | Zinc (Jarosite) | MMF | PER | Cajamarquilla | VOTORANTIM METAIS ZINCO | 2007 | 30 |  |  |  |  |
| 3580? (démarrage) | Zinc (Jarosite) | MMF | ITA | Portoscuso | PORTOVESME | 2002 | 24 | 0,1 (data from 2002 or 2006) | 43,5 (data from 2002 or 2006) | AISI 316L (data from 2002 or 2006) | SBR (data from 2002 or 2006) |
| 3975 | Nickel carbonate | MMF | FRA | LE HAVRE Sandouville | ERAMET | 2006 | 8 |  |  |  |  |
| 3733? | Cobalt chloride | MMF | FRA | LE HAVRE Sandouville | ERAMET | 1991 | 1 |  |  |  |  |
| 4307 | Nickel (neutralized slurry) | MMF | NCL | Mont Dore | VALE INCO | 2009 | 120 |  |  |  |  |
| 3863 - 4058 | Cobalt (Sulfate) | MMF | ZWB | Chambishi | CHAMBISHI METALS | 2001 | 60 |  |  |  |  |
| 3863 - 4058 | Cobalt (Hydroxide) | MMF | ZWB | Chambishi | CHAMBISHI METALS | 2001 | 60 |  |  |  |  |
| 3863 - 4058 | Cobalt (Hydroxide) | MMF | ZWB | Chambishi | CHAMBISHI METALS | 2006 | 60 |  |  |  |  |
| 4113 (start up) | Cobalt extension | MMF | ZWB | Chambishi | CHAMBISHI METALS | 2014 | 60 |  |  |  |  |
| 4102 - 4148 - 4245 (process audit offer) | Gypsum_cobalt | MMF | ZWB | Kitwe | CHAMBISHI METALS | 2014 | 60 |  |  |  |  |
| SS0440 | Phosphate Ore | MMF |  |  | CMM Miski Mayo / Bayovar | 2026 | 120 | 2.5 | 16 |  |  |

### Détail complet par filtre


#### Filtre: TG
- **Market**: Market
- **Submarket**: Submarket
- **Application**: Application
- **Product**: Product
- **Type of process**: Type of process
- **TG**: TG
- **Start-up date**: Start-up date
- **Country**: Country
- **Location**: Location
- **Area (m2)**: Area (m2)
- **Site of production**: Site of production
- **Reference number (filter)**: Reference number (filter)
- **Project number**: Project number
- **Slurry flowrate (T/h)**: Slurry flowrate (T/h)
- **Solid flowrate (T/h)**: Solid flowrate (T/h)
- **Temperature (°C)**: Temperature (°C)
- **Csolid (w/w%)**: Csolid (w/w%)
- **Particle size (μm)**: Particle size (μm)
- **pH**: pH
- **Cake thickness (mm)**: Cake thickness (mm)
- **Formation time (s)**: Formation time (s)
- **Washing method**: Washing method
- **Interzone (s)**: Interzone (s)
- **Wash 1 time (s)**: Wash 1 time (s)
- **Wash 2 time (s)**: Wash 2 time (s)
- **Wash 3 time (s)**: Wash 3 time (s)
- **Wash water 1 (m3/h)**: Wash water 1 (m3/h)
- **Wash ratio 1 (m3/t dry solid)**: Wash ratio 1  (m3/t) per dry solid
- **Wash water 2 (m3/h)**: Wash water 2 (m3/h)
- **Wash ratio 2 (m3/t dry solid)**: Wash ratio 2  (m3/t) per dry solid
- **Dry time (s)**: Dry time (s)
- **Cycle time (s)**: Cycle time (s)
- **Filtrability (T/h/m2)**: Filtrability (T/h/m2)
- **Lowest belt speed (m/min)**: Lowest belt speed (m/min)
- **Maximum belt speed (m/min)**: Maximum belt speed (m/min)
- **Vacuum pump air flow (m3/h)**: Vacuum pump air flow (m3/h)
- **Vacuum pump (m3/h/m2)**: Vacuum pump(m3/h/m2)
- **Dry cake (T/h)**: Dry cake (T/h)
- **Wet cake (T/h)**: Wet cake (T/h)
- **Daily dry cake (T/day)**: Daily dry cake (T/day)
- **Daily wet cake (T/day)**: Daily wet cake (T/day)
- **Cake moisture (%)**: Cake moisture (%)
- **Salt content in cake (%)**: Salt content in cake (%)
- **Frame**: Frame
- **Cloth return roller**: Cloth return roller
- **Belt support roller**: Belt support roller
- **Rubber belt**: Rubber belt
- **Filter cloth**: Filter cloth (Warp/Weft - Reference - opening - Fiber)
- **Vacuum box section**: Section
- **Vacuum box support frame**: Vacuum box support frame
- **Cloth and belt washing**: Cloth and belt washing
- **Wash water collecting tank**: Cloth and belt wash water collecting tank
- **Cake discharge hopper**: Cake discharge hopper
- **Cloth wash water pan**: Cloth wash water pan

#### Filtre: 3768?
- **Market**: MMF
- **Submarket**: N3 Nickel, Cobalt and Manganese
- **Application**: Hydrometallurgy
- **Product**: Nickel ore
- **TG**: 3768?
- **Start-up date**: 2006
- **Country**: NCL
- **Location**: Tiébaghi
- **Area (m2)**: 15.75
- **Site of production**: LE NICKEL-SLN 
- **Reference number (filter)**: 507546
- **Slurry flowrate (T/h)**: 42
- **Solid flowrate (T/h)**: 23
- **Csolid (w/w%)**: 54.8
- **Formation time (s)**: 12
- **Washing method**: No washing
- **Wash water 1 (m3/h)**: No washing
- **Wash ratio 1 (m3/t dry solid)**: No washing
- **Wash water 2 (m3/h)**: No washing
- **Wash ratio 2 (m3/t dry solid)**: No washing
- **Dry time (s)**: 60
- **Cycle time (s)**: 72
- **Filtrability (T/h/m2)**: 1.46
- **Lowest belt speed (m/min)**: 2
- **Maximum belt speed (m/min)**: 12
- **Vacuum pump air flow (m3/h)**: 2800
- **Vacuum pump (m3/h/m2)**: 178
- **Dry cake (T/h)**: 23
- **Wet cake (T/h)**: 29.5
- **Daily dry cake (T/day)**: 552
- **Daily wet cake (T/day)**: 707.7
- **Cake moisture (%)**: 22
- **Frame**: Carbon steel
- **Cloth return roller**: AISI 304L
- **Belt support roller**: AISI 304L
- **Rubber belt**: SBR
- **Filter cloth**: Mo - SEFAR - 85 - PP
- **Vacuum box section**: AISI 304L
- **Vacuum box support frame**: AISI 304L
- **Cloth and belt washing**: AISI 304L
- **Wash water collecting tank**: AISI 304L
- **Cake discharge hopper**: AISI 304L
- **Cloth wash water pan**: AISI 304L
- **Belt support table**: AISI 304L
- **Filtrate manifold**: Carbon steel
- **Filtrate receiver**: Carbon steel

#### Filtre: 3975
- **Market**: MMF
- **Submarket**: N3 Nickel, Cobalt and Manganese
- **Application**: Hydrometallurgy
- **Product**: Carbonate nickel
- **Type of process**: HCl
- **TG**: 3975
- **Area (m2)**: 8.13
- **Site of production**: ERAMET
- **Slurry flowrate (T/h)**: 0.7
- **Solid flowrate (T/h)**: 0.315
- **Temperature (°C)**: 10 à 30
- **Csolid (w/w%)**: 45
- **Washing method**: 2 Direct
- **Wash water 1 (m3/h)**: 1.5
- **Wash ratio 1 (m3/t dry solid)**: 4.76
- **Wash water 2 (m3/h)**: 10.8
- **Wash ratio 2 (m3/t dry solid)**: 34.29
- **Filtrability (T/h/m2)**: 0.04
- **Lowest belt speed (m/min)**: 0.5
- **Maximum belt speed (m/min)**: 3
- **Dry cake (T/h)**: 0.315
- **Wet cake (T/h)**: 0.7
- **Daily dry cake (T/day)**: 7.56
- **Daily wet cake (T/day)**: 16.8
- **Cake moisture (%)**: 55
- **Frame**: AISI 316L
- **Cloth return roller**: CSRL
- **Belt support roller**: CSRL
- **Rubber belt**: SBR
- **Filter cloth**: Mo/Mu - 07 8435 SK 10 - 10 - PES
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: Polypropylen
- **Cloth wash water pan**: Polypropylen
- **Belt support table**: AISI 316L
- **Filtrate manifold**: FRP
- **Filtrate receiver**: Polypropylen

#### Filtre: SD0130
- **Market**: MMF
- **Submarket**: N3 Nickel, Cobalt and Manganese
- **Application**: Hydrometallurgy
- **Product**: NiSO4
- **Type of process**: H2SO4
- **TG**: SD0130
- **Start-up date**: 2026
- **Area (m2)**: 6
- **Site of production**: BOLIDEN
- **Slurry flowrate (T/h)**: 8.3
- **Solid flowrate (T/h)**: 1.35
- **Temperature (°C)**: 50
- **Csolid (w/w%)**: 16
- **Washing method**: 1D
- **Lowest belt speed (m/min)**: 0.75
- **Maximum belt speed (m/min)**: 4.5
- **Vacuum pump air flow (m3/h)**: 1200
- **Vacuum pump (m3/h/m2)**: 200
- **Dry cake (T/h)**: 1.35
- **Cake moisture (%)**: 19
- **Salt content in cake (%)**: H2SO4<10%

#### Filtre: 3834
- **Market**: MMF
- **Submarket**: N3 Nickel, Cobalt and Manganese
- **Application**: Hydrometallurgy
- **Product**: Nickel
- **TG**: 3834
- **Country**: COL
- **Location**: Montelibano
- **Area (m2)**: 2.5
- **Site of production**: CERRO MATOSO
- **Reference number (filter)**: J1271-100
- **Slurry flowrate (T/h)**: 6
- **Solid flowrate (T/h)**: 1.7
- **Csolid (w/w%)**: 28.3
- **Formation time (s)**: 20
- **Washing method**: No washing
- **Wash water 1 (m3/h)**: No washing
- **Wash ratio 1 (m3/t dry solid)**: No washing
- **Wash water 2 (m3/h)**: No washing
- **Wash ratio 2 (m3/t dry solid)**: No washing
- **Filtrability (T/h/m2)**: 0.68
- **Lowest belt speed (m/min)**: 1.25
- **Maximum belt speed (m/min)**: 7.5
- **Vacuum pump air flow (m3/h)**: 900
- **Vacuum pump (m3/h/m2)**: 360
- **Dry cake (T/h)**: 1.7
- **Wet cake (T/h)**: 4.1
- **Daily dry cake (T/day)**: 40.8
- **Daily wet cake (T/day)**: 99.1
- **Cake moisture (%)**: 58.8
- **Frame**: Carbon steel
- **Cloth return roller**: AISI 304L
- **Belt support roller**: AISI 304L
- **Rubber belt**: SBR
- **Vacuum box section**: AISI 304L
- **Vacuum box support frame**: AISI 304L
- **Cloth and belt washing**: AISI 304L
- **Wash water collecting tank**: AISI 304L
- **Cake discharge hopper**: AISI 304L
- **Cloth wash water pan**: AISI 304L
- **Belt support table**: AISI 304L
- **Filtrate manifold**: AISI 304L
- **Filtrate receiver**: AISI 304L

#### Filtre: 3560? - 4307
- **Market**: MMF
- **Submarket**: N3 Nickel, Cobalt and Manganese
- **Application**: Hydrometallurgy
- **Product**: Nickel (neutralized slurry)
- **TG**: 3560? - 4307
- **Start-up date**: 2009
- **Country**: NCL
- **Location**: Mont Dore
- **Area (m2)**: 120
- **Site of production**: VALE INCO
- **Reference number (filter)**: 18083 - 01
- **Slurry flowrate (T/h)**: 195
- **Solid flowrate (T/h)**: 59
- **Temperature (°C)**: 68.2
- **Csolid (w/w%)**: 30.3
- **Formation time (s)**: 15
- **Washing method**: 1D + 1CC
- **Wash 1 time (s)**: 40
- **Wash water 1 (m3/h)**: 55
- **Wash ratio 1 (m3/t dry solid)**: 0.93
- **Dry time (s)**: 25
- **Cycle time (s)**: 90
- **Filtrability (T/h/m2)**: 0.49
- **Lowest belt speed (m/min)**: 5
- **Maximum belt speed (m/min)**: 30
- **Vacuum pump air flow (m3/h)**: 12000
- **Vacuum pump (m3/h/m2)**: 100
- **Dry cake (T/h)**: 59
- **Wet cake (T/h)**: 92.2
- **Daily dry cake (T/day)**: 1416
- **Daily wet cake (T/day)**: 2212.5
- **Cake moisture (%)**: 36
- **Frame**: AISI 316L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Vacuum box section**: AISI 316L
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 316L
- **Filtrate manifold**: AISI 316L
- **Filtrate receiver**: AISI 316L

#### Filtre: 3430 (démarrage)
- **Market**: MMF
- **Submarket**: L3 Zinc and cadmium
- **Application**: Hydrometallurgy
- **Product**: Zinc residue
- **TG**: 3430 (démarrage)
- **Area (m2)**: 31.5
- **Site of production**: ESPANOLA DEL ZINC
- **Solid flowrate (T/h)**: 1.46
- **Temperature (°C)**: 41.8
- **Cake thickness (mm)**: 2.94
- **Formation time (s)**: 44.32
- **Interzone (s)**: 2.3
- **Wash 1 time (s)**: 90.63
- **Wash 2 time (s)**: 34.06
- **Wash water 1 (m3/h)**: 1,61?
- **Wash water 2 (m3/h)**: 1,91?
- **Dry time (s)**: 33.76
- **Cycle time (s)**: 205.75
- **Lowest belt speed (m/min)**: 3.12
- **Maximum belt speed (m/min)**: 3.12
- **Dry cake (T/h)**: 1.46
- **Frame**: AISI 316L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Vacuum box section**: U45N
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 316L
- **Filtrate manifold**: U45N
- **Filtrate receiver**: U45N

#### Filtre: 3743 - 4047?
- **Market**: MMF
- **Submarket**: L3 Zinc and cadmium
- **Application**: Hydrometallurgy
- **Product**: Zinc (Jarosite)
- **TG**: 3743 - 4047?
- **Start-up date**: 2005
- **Country**: IND
- **Location**: Kerala
- **Area (m2)**: 63
- **Site of production**: BINANI ZINC LIMITED
- **Reference number (filter)**: 504717
- **Slurry flowrate (T/h)**: 38.4
- **Solid flowrate (T/h)**: 9.6
- **Temperature (°C)**: 80
- **Csolid (w/w%)**: 25
- **Formation time (s)**: 30
- **Washing method**: 2D
- **Interzone (s)**: 5
- **Wash 1 time (s)**: 40
- **Wash 2 time (s)**: 40
- **Wash water 1 (m3/h)**: 12
- **Wash ratio 1 (m3/t dry solid)**: 1.25
- **Wash water 2 (m3/h)**: 12
- **Wash ratio 2 (m3/t dry solid)**: 1.25
- **Dry time (s)**: 30
- **Cycle time (s)**: 145
- **Filtrability (T/h/m2)**: 0.15
- **Lowest belt speed (m/min)**: 2.67
- **Maximum belt speed (m/min)**: 16
- **Vacuum pump air flow (m3/h)**: 5100
- **Vacuum pump (m3/h/m2)**: 81
- **Dry cake (T/h)**: 9.6
- **Wet cake (T/h)**: 15.4
- **Daily dry cake (T/day)**: 230.4
- **Daily wet cake (T/day)**: 368.6
- **Cake moisture (%)**: 37.5
- **Frame**: AISI 316L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Vacuum box section**: AISI 904L
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 304L
- **Filtrate manifold**: AISI 904L
- **Filtrate receiver**: AISI 904L

#### Filtre: 3873 - 3933 (Technical visit)- 4096
- **Market**: MMF
- **Submarket**: L3 Zinc and cadmium
- **Application**: Hydrometallurgy
- **Product**: Zinc (BZS)
- **TG**: 3873 - 3933 (Technical visit)- 4096
- **Start-up date**: 2007
- **Country**: IND
- **Location**: Chanderiya
- **Area (m2)**: 24
- **Site of production**: HINDUSTAN ZINC
- **Reference number (filter)**: 508713 - 3
- **Slurry flowrate (T/h)**: 28.6
- **Solid flowrate (T/h)**: 6
- **Csolid (w/w%)**: 21
- **Formation time (s)**: 35
- **Washing method**: 1D
- **Interzone (s)**: 5
- **Wash 1 time (s)**: 15
- **Wash water 1 (m3/h)**: 10
- **Wash ratio 1 (m3/t dry solid)**: 1.67
- **Dry time (s)**: 40
- **Cycle time (s)**: 95
- **Filtrability (T/h/m2)**: 0.25
- **Lowest belt speed (m/min)**: 2
- **Maximum belt speed (m/min)**: 12
- **Vacuum pump air flow (m3/h)**: 2000
- **Vacuum pump (m3/h/m2)**: 83
- **Dry cake (T/h)**: 6
- **Wet cake (T/h)**: 7.2
- **Daily dry cake (T/day)**: 144
- **Daily wet cake (T/day)**: 172.8
- **Cake moisture (%)**: 16.7
- **Frame**: AISI 304L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Vacuum box section**: AISI 904L
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 304L
- **Belt support table**: AISI 304L
- **Filtrate manifold**: AISI 904L
- **Filtrate receiver**: AISI 316L

#### Filtre: 3873 - 3933 (Technical visit) - 4141 (Lab test offer) - 4175 (lab test offer)
- **Market**: MMF
- **Submarket**: L3 Zinc and cadmium
- **Application**: Hydrometallurgy
- **Product**: Zinc (Jarosite)
- **TG**: 3873 - 3933 (Technical visit) - 4141 (Lab test offer) - 4175 (lab test offer)
- **Start-up date**: 2007
- **Country**: IND
- **Location**: Chanderiya
- **Area (m2)**: 84
- **Site of production**: HINDUSTAN ZINC
- **Reference number (filter)**: 508713 - 1
- **Slurry flowrate (T/h)**: 30
- **Solid flowrate (T/h)**: 9.6
- **Temperature (°C)**: 70-90
- **Csolid (w/w%)**: 32
- **Formation time (s)**: 45
- **Washing method**: 2D
- **Interzone (s)**: 5
- **Wash 1 time (s)**: 35
- **Wash 2 time (s)**: 25
- **Wash water 1 (m3/h)**: 9.6
- **Wash ratio 1 (m3/t dry solid)**: 1
- **Wash water 2 (m3/h)**: 9.6
- **Wash ratio 2 (m3/t dry solid)**: 1
- **Dry time (s)**: 35
- **Cycle time (s)**: 145
- **Filtrability (T/h/m2)**: 0.11
- **Lowest belt speed (m/min)**: 3.67
- **Maximum belt speed (m/min)**: 22
- **Vacuum pump air flow (m3/h)**: 6000
- **Vacuum pump (m3/h/m2)**: 71
- **Dry cake (T/h)**: 9.6
- **Wet cake (T/h)**: 17.5
- **Daily dry cake (T/day)**: 230.4
- **Daily wet cake (T/day)**: 418.9
- **Cake moisture (%)**: 45
- **Frame**: AISI 304L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Vacuum box section**: AISI 904L
- **Vacuum box support frame**: AISI 304L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 304L
- **Filtrate manifold**: AISI 904L
- **Filtrate receiver**: AISI 316L

#### Filtre: 3872 (Démarrage) - 3500
- **Market**: MMF
- **Submarket**: J3 Metals recycling
- **Application**: Hydrometallurgy
- **Product**: Aluminium slags
- **TG**: 3872 (Démarrage) - 3500
- **Area (m2)**: 40
- **Site of production**: VEDANI
- **Slurry flowrate (T/h)**: 35.3
- **Solid flowrate (T/h)**: 6.3
- **Csolid (w/w%)**: 17.8
- **Formation time (s)**: 90
- **Wash 1 time (s)**: 15
- **Wash 2 time (s)**: 15
- **Wash 3 time (s)**: 15
- **Wash water 1 (m3/h)**: 3
- **Wash ratio 1 (m3/t dry solid)**: 0.48
- **Wash water 2 (m3/h)**: 3
- **Wash ratio 2 (m3/t dry solid)**: 0.48
- **Dry time (s)**: 15
- **Cycle time (s)**: 150
- **Filtrability (T/h/m2)**: 0.16
- **Lowest belt speed (m/min)**: 2.67
- **Maximum belt speed (m/min)**: 16
- **Vacuum pump air flow (m3/h)**: 3000
- **Vacuum pump (m3/h/m2)**: 75
- **Dry cake (T/h)**: 6.3
- **Wet cake (T/h)**: 7.5
- **Daily dry cake (T/day)**: 151.2
- **Daily wet cake (T/day)**: 179.7
- **Cake moisture (%)**: 15.9
- **Frame**: AISI 316L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Filter cloth**: Mo/Mo - SEFAR - 30 - PP
- **Vacuum box section**: AISI 316L
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 316L
- **Filtrate manifold**: AISI 316L
- **Filtrate receiver**: AISI 316L

#### Filtre: 3844 - 4326 (Pannevis belt filter process audit)
- **Market**: MMF
- **Submarket**: J3 Metals recycling
- **Application**: Hydrometallurgy
- **Product**: Aluminium slags
- **TG**: 3844 - 4326 (Pannevis belt filter process audit)
- **Start-up date**: 2007
- **Country**: ESP
- **Location**: Valladolid
- **Area (m2)**: 45
- **Site of production**: BEFESA ALUMINIO SA
- **Reference number (filter)**: 510338
- **Slurry flowrate (T/h)**: 22
- **Solid flowrate (T/h)**: 12
- **Csolid (w/w%)**: 54.5
- **Washing method**: 2D
- **Wash water 1 (m3/h)**: 6.34
- **Wash ratio 1 (m3/t dry solid)**: 0.53
- **Wash water 2 (m3/h)**: 2.38
- **Wash ratio 2 (m3/t dry solid)**: 0.2
- **Filtrability (T/h/m2)**: 0.27
- **Lowest belt speed (m/min)**: 2.5
- **Maximum belt speed (m/min)**: 15
- **Vacuum pump air flow (m3/h)**: 3600
- **Vacuum pump (m3/h/m2)**: 80
- **Dry cake (T/h)**: 12
- **Wet cake (T/h)**: 15.4
- **Daily dry cake (T/day)**: 288
- **Daily wet cake (T/day)**: 369.2
- **Cake moisture (%)**: 22
- **Frame**: Carbon steel
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: EPDM
- **Filter cloth**: Mo - PP
- **Vacuum box section**: AISI 316L
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 316L
- **Filtrate manifold**: AISI 316L
- **Filtrate receiver**: AISI 316L

#### Filtre: 3859 (Démarrage) - 3976 - 4059 (commissioning offer)
- **Market**: MMF
- **Submarket**: D3 Uranium
- **Application**: Hydrometallurgy
- **Product**: Uranium peroxide
- **Type of process**: Amine extraction
- **TG**: 3859 (Démarrage) - 3976 - 4059 (commissioning offer)
- **Area (m2)**: 6
- **Site of production**: COGEMA/AREVA
- **Slurry flowrate (T/h)**: 1.02
- **Solid flowrate (T/h)**: 0.41
- **Csolid (w/w%)**: 40.2
- **Washing method**: 1D + 1CC
- **Filtrability (T/h/m2)**: 0.07
- **Vacuum pump air flow (m3/h)**: 750
- **Vacuum pump (m3/h/m2)**: 125
- **Dry cake (T/h)**: 0.41
- **Daily dry cake (T/day)**: 9.84
- **Frame**: AISI 316L
- **Cloth return roller**: AISI 316L
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Filter cloth**: Mo/Mu - SEFAR - 20 - PP
- **Vacuum box section**: AISI 316L
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: AISI 316L
- **Cake discharge hopper**: AISI 316L
- **Cloth wash water pan**: AISI 316L
- **Belt support table**: AISI 316L

#### Filtre: 3741
- **Market**: MMF
- **Submarket**: F3 Copper (hydrometallurgy)
- **Application**: Hydrometallurgy
- **Product**: Copper oxide
- **TG**: 3741
- **Start-up date**: 2005
- **Country**: BEL
- **Location**: St Ghislain
- **Area (m2)**: 3
- **Site of production**: ERACHEM COMILOG
- **Reference number (filter)**: 504385
- **Slurry flowrate (T/h)**: 5.04
- **Solid flowrate (T/h)**: 0.51
- **Csolid (w/w%)**: 10.1
- **Washing method**: 2D
- **Wash water 1 (m3/h)**: 2.5
- **Wash ratio 1 (m3/t dry solid)**: 4.9
- **Wash water 2 (m3/h)**: 1.7
- **Wash ratio 2 (m3/t dry solid)**: 3.33
- **Filtrability (T/h/m2)**: 0.17
- **Lowest belt speed (m/min)**: 0.83
- **Maximum belt speed (m/min)**: 5
- **Vacuum pump air flow (m3/h)**: 550
- **Vacuum pump (m3/h/m2)**: 183
- **Dry cake (T/h)**: 0.51
- **Daily dry cake (T/day)**: 12.24
- **Frame**: AISI 904L
- **Cloth return roller**: CSRL
- **Belt support roller**: AISI 316L
- **Rubber belt**: SBR
- **Filter cloth**: Mo/Mo - PP
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 904L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: POLYPROPYLEN
- **Cake discharge hopper**: POLYETHYLENE
- **Cloth wash water pan**: POLYPROPYLEN
- **Belt support table**: AISI 904L
- **Filtrate manifold**: POLYPROPYLEN
- **Filtrate receiver**: FRP

#### Filtre: 3905 (Démarrage) - 3933 (Technical visit) - 4066 (Audit)
- **Market**: MMF
- **Submarket**: T3 Other metals
- **Application**: Hydrometallurgy
- **Product**: Dichromate sodium
- **TG**: 3905 (Démarrage) - 3933 (Technical visit) - 4066 (Audit)
- **Start-up date**: 2007
- **Country**: IND
- **Location**: Anakapalle
- **Area (m2)**: 49.5
- **Site of production**: VISHNU CHEMICALS
- **Reference number (filter)**: 513472 ou 508711
- **Slurry flowrate (T/h)**: 58
- **Solid flowrate (T/h)**: 25
- **Temperature (°C)**: 80
- **Csolid (w/w%)**: 43.1
- **pH**: 8.5
- **Formation time (s)**: 35
- **Washing method**: 2D
- **Interzone (s)**: 5
- **Wash 1 time (s)**: 20
- **Wash 2 time (s)**: 20
- **Wash water 1 (m3/h)**: 11
- **Wash ratio 1 (m3/t dry solid)**: 0.44
- **Wash water 2 (m3/h)**: 10
- **Wash ratio 2 (m3/t dry solid)**: 0.4
- **Dry time (s)**: 50
- **Cycle time (s)**: 130
- **Filtrability (T/h/m2)**: 0.51
- **Lowest belt speed (m/min)**: 2.67
- **Maximum belt speed (m/min)**: 16
- **Vacuum pump air flow (m3/h)**: 5000
- **Vacuum pump (m3/h/m2)**: 101
- **Dry cake (T/h)**: 25
- **Wet cake (T/h)**: 33.8
- **Daily dry cake (T/day)**: 600
- **Daily wet cake (T/day)**: 810.8
- **Cake moisture (%)**: 26
- **Frame**: Carbon steel
- **Cloth return roller**: AISI 304L
- **Belt support roller**: AISI 304L
- **Rubber belt**: EPDM
- **Vacuum box section**: AISI 304L
- **Vacuum box support frame**: AISI 304L
- **Cloth and belt washing**: AISI 304L
- **Wash water collecting tank**: AISI 304L
- **Cake discharge hopper**: AISI 304L
- **Cloth wash water pan**: AISI 304L
- **Belt support table**: Carbon steel
- **Filtrate manifold**: AISI 304L
- **Filtrate receiver**: AISI 304L

#### Filtre: 4121
- **Market**: ENV
- **Submarket**: A5 FGD (Flue-gas-desulfurization)
- **Application**: FGD
- **Product**: FGD (Gypsum)
- **Type of process**: Wet FGD
- **TG**: 4121
- **Area (m2)**: 12.4
- **Site of production**: KC Cotrell
- **Slurry flowrate (T/h)**: 20
- **Solid flowrate (T/h)**: 10
- **Csolid (w/w%)**: 50
- **Formation time (s)**: 20
- **Washing method**: 1D
- **Interzone (s)**: 10
- **Wash 1 time (s)**: 20
- **Dry time (s)**: 40
- **Cycle time (s)**: 90
- **Filtrability (T/h/m2)**: 0.81
- **Lowest belt speed (m/min)**: 2
- **Maximum belt speed (m/min)**: 12
- **Vacuum pump air flow (m3/h)**: 3700
- **Vacuum pump (m3/h/m2)**: 298
- **Dry cake (T/h)**: 10
- **Wet cake (T/h)**: 11.1
- **Daily dry cake (T/day)**: 240
- **Daily wet cake (T/day)**: 267
- **Cake moisture (%)**: 10
- **Salt content in cake (%)**: 100
- **Frame**: Carbon steel
- **Cloth return roller**: CSRL
- **Belt support roller**: CSRL
- **Rubber belt**: SBR
- **Filter cloth**: Mo - SEFAR - 85 - PP
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: POLYPROPYLEN
- **Cake discharge hopper**: POLYPROPYLEN
- **Cloth wash water pan**: POLYPROPYLEN
- **Belt support table**: AISI 304L
- **Filtrate manifold**: FRP
- **Filtrate receiver**: FRP

#### Filtre: 4109 (Start up)
- **Market**: ENV
- **Submarket**: A5 FGD (Flue-gas-desulfurization)
- **Application**: FGD
- **Product**: FGD (Gypsum)
- **Type of process**: Wet FGD
- **TG**: 4109 (Start up)
- **Start-up date**: 2014
- **Country**: KOR
- **Location**: Yeong_Heung 5,6
- **Area (m2)**: 49.5
- **Site of production**: KOREAN SOUTH-EAST POWER (KOSEP)
- **Reference number (filter)**: 863 / 1
- **Slurry flowrate (T/h)**: 80
- **Solid flowrate (T/h)**: 40
- **Csolid (w/w%)**: 50
- **Formation time (s)**: 20
- **Washing method**: 1D
- **Interzone (s)**: 12
- **Wash 1 time (s)**: 18
- **Dry time (s)**: 40
- **Cycle time (s)**: 90
- **Filtrability (T/h/m2)**: 0.81
- **Lowest belt speed (m/min)**: 3.17
- **Maximum belt speed (m/min)**: 22
- **Vacuum pump air flow (m3/h)**: 15000
- **Vacuum pump (m3/h/m2)**: 303
- **Dry cake (T/h)**: 40
- **Wet cake (T/h)**: 44.4
- **Daily dry cake (T/day)**: 960
- **Daily wet cake (T/day)**: 1067
- **Cake moisture (%)**: 10
- **Salt content in cake (%)**: 100
- **Frame**: Carbon steel
- **Cloth return roller**: CSRL
- **Belt support roller**: CSRL
- **Rubber belt**: SBR
- **Filter cloth**: Mo - SEFAR - 85 - PP
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: POLYPROPYLEN
- **Cake discharge hopper**: POLYPROPYLEN
- **Cloth wash water pan**: POLYPROPYLEN
- **Belt support table**: AISI 304L
- **Filtrate manifold**: FRP
- **Filtrate receiver**: FRP

#### Filtre: 3955 (mechanical acceptance)
- **Market**: ENV
- **Submarket**: A5 FGD (Flue-gas-desulfurization)
- **Application**: FGD
- **Product**: FGD (Gypsum)
- **Type of process**: Wet FGD
- **TG**: 3955 (mechanical acceptance)
- **Start-up date**: 2010
- **Country**: USA
- **Location**: Stratton
- **Area (m2)**: 73.5
- **Site of production**: FIRST ENERGY SAMMIS
- **Reference number (filter)**: 509218
- **Slurry flowrate (T/h)**: 161
- **Solid flowrate (T/h)**: 64
- **Csolid (w/w%)**: 39.75
- **Formation time (s)**: 20
- **Washing method**: No washing
- **Dry time (s)**: 40
- **Cycle time (s)**: 60
- **Filtrability (T/h/m2)**: 0.87
- **Lowest belt speed (m/min)**: 4.67
- **Maximum belt speed (m/min)**: 28
- **Vacuum pump air flow (m3/h)**: 27000
- **Vacuum pump (m3/h/m2)**: 367
- **Dry cake (T/h)**: 64
- **Wet cake (T/h)**: 73.6
- **Daily dry cake (T/day)**: 1536
- **Daily wet cake (T/day)**: 1766
- **Cake moisture (%)**: 13
- **Frame**: Carbon steel
- **Cloth return roller**: CSRL
- **Belt support roller**: CSRL
- **Rubber belt**: SBR
- **Filter cloth**: Mo - SEFAR - 85 - PP
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: POLYPROPYLEN
- **Cake discharge hopper**: POLYPROPYLEN
- **Cloth wash water pan**: POLYPROPYLEN
- **Belt support table**: Carbon steel
- **Filtrate manifold**: CSRL
- **Filtrate receiver**: CSRL

#### Filtre: 3937 (Visit + Lab test) - 4020 (Technical audit)
- **Market**: ENV
- **Submarket**: A5 FGD (Flue-gas-desulfurization)
- **Application**: FGD
- **Product**: FGD (Gypsum)
- **Type of process**: Wet FGD
- **TG**: 3937 (Visit + Lab test) - 4020 (Technical audit)
- **Start-up date**: 2007
- **Country**: USA
- **Location**: Casterville
- **Area (m2)**: 93
- **Site of production**: GEORGIA POWER, PLANT AMEC BOWDEN
- **Reference number (filter)**: 509561 - 1
- **Cake thickness (mm)**: 25
- **Formation time (s)**: 15 (Lab test values)
- **Washing method**: 1D
- **Interzone (s)**: 10 (Lab test values)
- **Wash 1 time (s)**: 15 (Lab test values)
- **Dry time (s)**: 70 (Lab test values)
- **Cycle time (s)**: 110 (Lab test values)
- **Frame**: Carbon steel
- **Cloth return roller**: CSRL
- **Belt support roller**: CSRL
- **Rubber belt**: SBR
- **Filter cloth**: Mo - SEFAR - 85 - PP
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: POLYPROPYLEN
- **Cake discharge hopper**: POLYPROPYLEN
- **Cloth wash water pan**: POLYPROPYLEN
- **Belt support table**: Carbon steel
- **Filtrate manifold**: FRP
- **Filtrate receiver**: CSRL

#### Filtre: 3956 (mechanical acceptance) - 3961 (Visit)
- **Market**: ENV
- **Submarket**: A5 FGD (Flue-gas-desulfurization)
- **Application**: FGD
- **Product**: FGD (Gypsum)
- **Type of process**: Wet FGD
- **TG**: 3956 (mechanical acceptance) - 3961 (Visit)
- **Area (m2)**: 13.7
- **Site of production**: Korea zinc eng
- **Reference number (filter)**: 513674
- **Slurry flowrate (T/h)**: 25.1
- **Solid flowrate (T/h)**: 9.1
- **Csolid (w/w%)**: 36
- **Formation time (s)**: 20
- **Washing method**: 1D
- **Interzone (s)**: 10
- **Wash 1 time (s)**: 20
- **Dry time (s)**: 40
- **Cycle time (s)**: 90
- **Filtrability (T/h/m2)**: 0.66
- **Lowest belt speed (m/min)**: 2.17
- **Maximum belt speed (m/min)**: 13
- **Vacuum pump air flow (m3/h)**: 4200
- **Vacuum pump (m3/h/m2)**: 307
- **Dry cake (T/h)**: 9.1
- **Daily dry cake (T/day)**: 218.4
- **Frame**: Carbon steel
- **Cloth return roller**: CSRL
- **Belt support roller**: CSRL
- **Rubber belt**: SBR
- **Filter cloth**: Mo - SEFAR - 85 - PP
- **Vacuum box section**: FRP
- **Vacuum box support frame**: AISI 316L
- **Cloth and belt washing**: AISI 316L
- **Wash water collecting tank**: POLYPROPYLEN
- **Cake discharge hopper**: POLYPROPYLEN
- **Cloth wash water pan**: POLYPROPYLEN
- **Belt support table**: Carbon steel
- **Filtrate manifold**: FRP
- **Filtrate receiver**: FRP

---

*Note: Le JSON complet contient l'intégralité des 92 filtres avec tous leurs paramètres.*